Process Attendant Tower (d-crew)
Martin Marietta Materials

Midlothian, Texas

Posted in Mining


This job has expired.

Job Info


Under supervision of Shift Supervisor, makes routine checks of all tower equipment to ensure it is operating properly.

Responsibilities

  • Check all equipment in tower area
  • Obtain raw feed measurement and calcination on a regular time schedule
  • Keep all cyclones, gas, and fuel vessels clear of build-up
  • Assist with kiln repairs pre-heater tower and associated equipment plug-free
  • Measure silos periodically, service inlet 02 analyzer when necessary
  • Assure that blending silo material empties into proper storage silo and that the silos are feeding properly
  • Make sure blend silo dust collector is clear
  • Check tipping valves and lubricate as needed
  • Unplug cyclone as it plugs
  • Perform duties as assigned by Shift Supervisor
  • Keep feed shelf clean and free of buildup
  • Keep Shift Supervisor informed of mechanical electrical repairs needed and help prioritize these repairs
  • Help train other employees
  • Communicate with Pyro-Process Operator prior to opening any door
Minimum Education and Experience
  • High school diploma or equivalent
  • Must have plant experience or knowledge of Finish Mill(s) and Kiln(s) and their operation
  • Must have some mathematics knowledge (such as addition, subtraction and multiplication). Must have some computer skills.
Physical Requirements
  • Must be able to walk ½ to 1 mile per day
  • Must be able to climb ladder and stairs up to 400' if needed
  • Must be able to be exposed to heights of 200'- 300'
  • Must be able to keep area safety inspection
  • Must be able to read and write legibly to keep records on equipment and tools and read equipment manuals
  • Must be able to understand and speak clearly on mobile radio unit
  • Must be able to use hand wrenches, power tools, and be familiar with power shot systems
  • Must be able to use shovel, broom, jackhammer, wheelbarrow for housekeeping 9.
  • Must be able to lift up to 100 lbs.
  • Must be able to operate bobcat, manlift, and forklift
  • Must be able to work with solvents and paints and must wear proper protective equipment
Working Conditions

Must be able to work in all weather conditions (heat, cold, and rain). Noise levels may reach maximum of 106 dba for a period of 5-10 minutes an hour. Must be able to work in conditions including the following: odors, dust, mechanical hazards, electrical hazards, hazardous chemicals, and non-hazardous materials. For this job, the nature of these hazards cannot be controlled due to the job environment and job procedures. In this case, the type of safety equipment required is: company issued headgear, gloves, earplugs, steel-toed shoes or boots, safety glasses, respirators, lock-out. Must be able to work rotating shifts


This job has expired.

More Mining jobs


Nucor Corporation
Dallas, Texas
Posted about 2 hours ago

Nucor Corporation
Salt Lake City, Utah
Posted about 2 hours ago

Nucor Corporation
Shelbyville, Indiana
Posted about 2 hours ago

Get Hired Faster

Subscribe to job alerts and upload your resume!

*By registering with our site, you agree to our
Terms and Privacy Policy.